Upgrade Cisco ASR 9K
- Détails
- Catégorie : Cisco
- Publié le mardi 14 mai 2013 13:25
- Écrit par brahim AIT BENALI
- Affichages : 3668
Upgrade OS Cisco ASR 9K
Le but de cet article est de montrer la procédure à suivre pour mettre à jour la version des Ciscos ASR 9K.
Dans cet article on mettra la version 4.3 (ISO-WR-9K-4.3.tar)
Procédure:
Commencer par se connecter en console et faire un show version brief, pour voir la version actuelle du système.
RP/0/RSP0/CPU0:ios#sho version brief
Tue May 14 01:41:49.922 UTC
Cisco IOS XR Software, Version 4.2.3[Default]
Copyright (c) 2012 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 0.62(c) 1994-2012 by Cisco Systems, Inc.
ios uptime is 43 minutes
System image file is "disk0:asr9k-os-mbi-4.2.3.CSCuc79084-1.0.0/0x100305/mbiasr9k-rsp3.vm"
cisco ASR9K Series (Intel 686 F6M14S4) processor with 6291456K bytes of memory.
Intel 686 F6M14S4 processor at 2128MHz, Revision 2.174
ASR 9010 AC Chassis with PEM Version 2
4 Management Ethernet
40 GigabitEthernet
8 TenGigE
8 DWDM controller(s)
8 WANPHY controller(s)
503k bytes of non-volatile configuration memory.
955M bytes of compact flash card.
6271M bytes of hard disk.
11817968k bytes of disk0: (Sector size 512 bytes).
11817968k bytes of disk1: (Sector size 512 bytes)
Copier l'OS (ISO-WR-9K-4.3.tar) sur une clé USB et brancher cette dernière sur l'équipement.
Puis faire une dir usb
RP/0/RSP0/CPU0:ios#dir usb:
Tue May 14 01:42:21.594 UTC
Directory of usb:
65536 ---- 0 Wed Feb 13 22:51:32 2013 =USB DISK
76928 -rw- 440857088 Mon Mar 18 23:49:07 2013 IOS-XR-9K-4.3.tar
en mode admin, installer la nouvelle version.
RP/0/RSP0/CPU0:ios#admin
RP/0/RSP0/CPU0:ios(admin)#install add tar usb:/IOS-XR-9K-4.3-RIE.tar sync
Tue May 14 01:51:45.625 UTC
Install operation 7 '(admin) install add tar /usb:/IOS-XR-9K-4.3-RIE.tar
synchronous' started by user 'admin' via CLI at 01:51:45 UTC Tue May 14 2013.
Info: The following files were extracted from the tar file
Info: '/usb:/IOS-XR-9K-4.3-RIE.tar' and will be added to the entire router:
Info:
Info: asr9k-doc-px.pie-4.3.0
Info: asr9k-fpd-px.pie-4.3.0
Info: asr9k-k9sec-px.pie-4.3.0
Info: asr9k-mcast-px.pie-4.3.0
Info: asr9k-mgbl-px.pie-4.3.0
Info: asr9k-mini-px.pie-4.3.0
Info: asr9k-mpls-px.pie-4.3.0
Info: asr9k-optic-px.pie-4.3.0
Info:
Info: The following packages are now available to be activated:
Info:
Info: disk0:asr9k-doc-px-4.3.0
Info: disk0:asr9k-fpd-px-4.3.0
Info: disk0:asr9k-k9sec-px-4.3.0
Info: disk0:asr9k-mcast-px-4.3.0
Info: disk0:asr9k-mgbl-px-4.3.0
Info: disk0:asr9k-mini-px-4.3.0
Info: disk0:asr9k-mpls-px-4.3.0
Info: disk0:asr9k-optic-px-4.3.0
Info:
Info: The packages can be activated across the entire router.
Info:
Install operation 7 completed successfully at 02:01:50 UTC Tue May 14 2013.
Lancer l'activation de l'os:
RP/0/RSP0/CPU0:ios(admin)#show install inactive summary
Tue May 14 02:05:24.312 UTC
Default Profile:
SDRs:
Owner
Inactive Packages:
disk0:asr9k-optic-px-4.3.0
disk0:asr9k-mini-px-4.3.0
disk0:asr9k-doc-px-4.3.0
disk0:asr9k-k9sec-px-4.3.0
disk0:asr9k-mpls-px-4.3.0
disk0:asr9k-mgbl-px-4.3.0
disk0:asr9k-mcast-px-4.3.0
disk0:asr9k-fpd-px-4.3.0
RP/0/RSP0/CPU0:ios(admin)#install activate disk0:*4.3.0* sync
Tue May 14 02:09:16.338 UTC
Install operation 8 '(admin) install activate disk0:*4.3.0* synchronous'
started by user 'admin' via CLI at 02:09:16 UTC Tue May 14 2013.
Info: This operation will activate the following packages:
Info: disk0:asr9k-optic-px-4.3.0
Info: disk0:asr9k-mpls-px-4.3.0
Info: disk0:asr9k-mini-px-4.3.0
Info: disk0:asr9k-mgbl-px-4.3.0
Info: disk0:asr9k-mcast-px-4.3.0
Info: disk0:asr9k-k9sec-px-4.3.0
Info: disk0:asr9k-fpd-px-4.3.0
Info: disk0:asr9k-doc-px-4.3.0
Info: This operation will reload the following nodes in parallel:
Info: 0/RSP0/CPU0 (RP) (SDR: Owner)
Info: 0/RSP1/CPU0 (RP) (SDR: Owner)
Info: 0/0/CPU0 (LC) (SDR: Owner)
Info: 0/1/CPU0 (LC) (SDR: Owner)
Proceed with this install operation (y/n)? [y]
Info: Install Method: Parallel Reload
\ 100% complete: The operation can still be aborted (ctrl-c for options)RP/0/RSP0/CPU0:May 14 02:10:10.481 : rmf_svr[372]: %HA-REDCON-1-STANDBY_NOT_READY : standby card is NOT ready
Info: The changes made to software configurations will not be persistent
Info: across system reloads. Use the command '(admin) install commit' to
Info: make changes persistent.
Info: Please verify that the system is consistent following the software
Info: change using the following commands:
Info: show system verify
Info: install verify packages
| 100% complete: The operation can still be aborted (ctrl-c for options)RP/0/RSP1/CPU0:May 14 02:10:10.482 : rmf_svr[372]: %HA-REDCON-1-STANDBY_NOT_READY : standby card is NOT ready
Install operation 8 completed successfully at 02:10:10 UTC Tue May 14 2013.
L'équipement redémarre
Vérifier que l'équipement ainsi que toutes les cartes sont UP.
RP/0/RSP0/CPU0:ios#admin show platform
Tue May 14 02:16:34.737 UTC
Node Type State Config State
-----------------------------------------------------------------------------
0/RSP0/CPU0 A9K-RSP440-TR(Active) IOS XR RUN PWR,NSHUT,MON
0/RSP1/CPU0 A9K-RSP440-TR(Standby) IOS XR RUN PWR,NSHUT,MON
0/FT0/SP FAN TRAY READY
0/FT1/SP FAN TRAY READY
0/0/CPU0 A9K-MOD80-SE IOS XR RUN PWR,NSHUT,MON
0/0/0 A9K-MPA-4X10GE OK PWR,NSHUT,MON
0/0/1 A9K-MPA-20X1GE OK PWR,NSHUT,MON
0/1/CPU0 A9K-MOD80-SE IOS XR RUN PWR,NSHUT,MON
0/1/0 A9K-MPA-4X10GE OK PWR,NSHUT,MON
0/1/1 A9K-MPA-20X1GE OK PWR,NSHUT,MON
0/PM0/SP PWR-3KW-AC-V2 READY PWR,NSHUT,MON
0/PM4/SP PWR-3KW-AC-V2 READY PWR,NSHUT,MON
RP/0/RSP0/CPU0:ios#admin show redundancy
Tue May 14 02:18:13.683 UTC
Redundancy information for node 0/RSP0/CPU0:
==========================================
Node 0/RSP0/CPU0 is in ACTIVE role
Node Redundancy Partner (0/RSP1/CPU0) is in STANDBY role
Standby node in 0/RSP1/CPU0 is ready
Standby node in 0/RSP1/CPU0 is NSR-not-configured
Node 0/RSP0/CPU0 is in process group PRIMARY role
Process Redundancy Partner (0/RSP1/CPU0) is in BACKUP role
Backup node in 0/RSP1/CPU0 is ready
Backup node in 0/RSP1/CPU0 is NSR-not-configured
Group Primary Backup Status
--------- --------- --------- ---------
dsc 0/RSP0/CPU0 0/RSP1/CPU0 Ready
dlrsc 0/RSP0/CPU0 0/RSP1/CPU0 Ready
central-services 0/RSP0/CPU0 0/RSP1/CPU0 Ready
v4-routing 0/RSP0/CPU0 0/RSP1/CPU0 Ready
netmgmt 0/RSP0/CPU0 0/RSP1/CPU0 Ready
mcast-routing 0/RSP0/CPU0 0/RSP1/CPU0 Ready
v6-routing 0/RSP0/CPU0 0/RSP1/CPU0 Ready
Reload and boot info
----------------------
A9K-RSP440-TR reloaded Tue May 14 02:11:59 2013: 6 minutes ago
Active node booted Tue May 14 02:11:59 2013: 6 minutes ago
Standby node boot Tue May 14 02:12:16 2013: 5 minutes ago
Standby node last went not ready Tue May 14 02:15:56 2013: 2 minutes ago
Standby node last went ready Tue May 14 02:15:56 2013: 2 minutes ago
There have been 0 switch-overs since reload
Active node reload "Cause: dSC node reload is required by install operation"
Standby node reload "Cause: Node reload is required by install operation"
RP/0/RSP0/CPU0:ios#admin install commit
Tue May 14 02:19:49.234 UTC
Install operation 9 '(admin) install commit' started by user 'admin' via CLI at
02:19:49 UTC Tue May 14 2013.
- 100% complete: The operation can no longer be aborted (ctrl-c for options)RP/0/RSP0/CPU0:May 14 02:19:50.079 : instdir[254]: %INSTALL-INSTMGR-4-ACTIVE_SOFTWARE_COMMITTED_INFO : The currently active software is now the same as the committed software.
Install operation 9 completed successfully at 02:19:50 UTC Tue May 14 2013.
RP/0/RSP0/CPU0:ios#
RP/0/RSP0/CPU0:ios# show hw-hardware fpd location all
vérifier que tout a été bien mis à jour.
RP/0/RSP0/CPU0:ios#admin show install active summary
Tue May 14 02:20:45.002 UTC
Default Profile:
SDRs:
Owner
Active Packages:
disk0:asr9k-doc-px-4.3.0
disk0:asr9k-fpd-px-4.3.0
disk0:asr9k-k9sec-px-4.3.0
disk0:asr9k-mcast-px-4.3.0
disk0:asr9k-mgbl-px-4.3.0
disk0:asr9k-mini-px-4.3.0
disk0:asr9k-mpls-px-4.3.0
disk0:asr9k-optic-px-4.3.0
RP/0/RSP0/CPU0:ios#
RP/0/RSP0/CPU0:ios#show version brief
Tue May 14 02:22:30.616 UTC
Cisco IOS XR Software, Version 4.3.0[Default]
Copyright (c) 2012 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 0.62(c) 1994-2012 by Cisco Systems, Inc.
ios uptime is 10 minutes
System image file is "disk0:asr9k-os-mbi-4.3.0/0x100305/mbiasr9k-rsp3.vm"
cisco ASR9K Series (Intel 686 F6M14S4) processor with 6291456K bytes of memory.
Intel 686 F6M14S4 processor at 2132MHz, Revision 2.174
ASR 9010 AC Chassis with PEM Version 2
4 Management Ethernet
8 TenGigE
8 DWDM controller(s)
8 WANPHY controller(s)
40 GigabitEthernet
503k bytes of non-volatile configuration memory.
955M bytes of compact flash card.
6271M bytes of hard disk.
11817968k bytes of disk0: (Sector size 512 bytes).
11817968k bytes of disk1: (Sector size 512 bytes).
RP/0/RSP0/CPU0:ios#
Vérifier que tout les modules sont à jour, si vous avez des "Yes" c'est à dire que le module a besoin d'une mise à jour.
RP/0/RSP0/CPU0:ios(admin)#show hw-module fpd location all
Tue May 14 04:37:39.409 UTC
===================================== ==========================================
Existing Field Programmable Devices
==========================================
HW Current SW Upg/
Location Card Type Version Type Subtype Inst Version Dng?
============ ======================== ======= ==== ======= ==== =========== ====
0/RSP0/CPU0 A9K-RSP440-TR 1.0 lc cbc 0 16.115 No
lc fpga1 0 0.09 No
lc fpga2 0 1.06 No
lc fpga3 0 4.09 No
lc rommon 0 0.62 Yes
--------------------------------------------------------------------------------
0/RSP0/CPU0 ASR-9010-FAN 1.0 lc cbc 2 4.00 Yes
--------------------------------------------------------------------------------
0/RSP0/CPU0 ASR-9010-FAN 1.0 lc cbc 3 4.00 Yes
--------------------------------------------------------------------------------
0/RSP1/CPU0 A9K-RSP440-TR 1.0 lc cbc 0 16.115 No
lc fpga1 0 0.09 No
lc fpga3 0 4.09 No
lc fpga2 0 1.06 No
lc rommon 0 0.62 Yes
--------------------------------------------------------------------------------
0/0/CPU0 A9K-MOD80-SE 1.0 lc cbc 0 20.115 No
lc fpga2 0 1.01 Yes
lc fpga4 0 1.05 No
lc rommon 0 1.28 Yes
--------------------------------------------------------------------------------
0/0/0 A9K-MPA-4X10GE 1.101 spa fpga6 0 1.06 No
--------------------------------------------------------------------------------
0/0/1 A9K-MPA-20X1GE 1.101 spa fpga3 1 0.08 No
--------------------------------------------------------------------------------
0/1/CPU0 A9K-MOD80-SE 1.0 lc cbc 0 20.115 No
lc fpga2 0 1.01 Yes
lc fpga4 0 1.05 No
lc rommon 0 1.28 Yes
--------------------------------------------------------------------------------
0/1/0 A9K-MPA-4X10GE 1.101 spa fpga6 0 1.06 No
--------------------------------------------------------------------------------
0/1/1 A9K-MPA-20X1GE 1.101 spa fpga3 1 0.08 No
--------------------------------------------------------------------------------
NOTES:
1. One or more FPD needs an upgrade or a downgrade. This can be accomplished
using the "admin> upgrade hw-module fpd <fpd> location <loc>" CLI.
Pour mettre à jour les modules, utiliser la commande "upgrade hw-module fpd all location all"
puis faire un reload de tout le chassis en utilisant la commande
après redémarrage lancer la commande show hw-module fpd location all" pour vérifier que tous les modules sont maintenant à jour.
RP/0/RSP0/CPU0:RIE-MRS-BB-PE(admin)#show hw-module fpd location all
Tue May 14 04:57:26.185 UTC
===================================== ==========================================
Existing Field Programmable Devices
==========================================
HW Current SW Upg/
Location Card Type Version Type Subtype Inst Version Dng?
============ ======================== ======= ==== ======= ==== =========== ====
0/RSP0/CPU0 A9K-RSP440-TR 1.0 lc cbc 0 16.115 No
lc fpga1 0 0.09 No
lc fpga2 0 1.06 No
lc fpga3 0 4.09 No
lc rommon 0 0.70 No
--------------------------------------------------------------------------------
0/RSP0/CPU0 ASR-9010-FAN 1.0 lc cbc 2 4.02 No
--------------------------------------------------------------------------------
0/RSP0/CPU0 ASR-9010-FAN 1.0 lc cbc 3 4.02 No
--------------------------------------------------------------------------------
0/RSP1/CPU0 A9K-RSP440-TR 1.0 lc cbc 0 16.115 No
lc fpga1 0 0.09 No
lc fpga2 0 1.06 No
lc fpga3 0 4.09 No
lc rommon 0 0.70 No
--------------------------------------------------------------------------------
0/0/CPU0 A9K-MOD80-SE 1.0 lc cbc 0 20.115 No
lc fpga2 0 1.04 No
lc fpga4 0 1.05 No
lc rommon 0 1.29 No
--------------------------------------------------------------------------------
0/0/0 A9K-MPA-4X10GE 1.101 spa fpga6 0 1.06 No
--------------------------------------------------------------------------------
0/0/1 A9K-MPA-20X1GE 1.101 spa fpga3 1 0.08 No
--------------------------------------------------------------------------------
0/1/CPU0 A9K-MOD80-SE 1.0 lc cbc 0 20.115 No
lc fpga2 0 1.04 No
lc fpga4 0 1.05 No
lc rommon 0 1.29 No
--------------------------------------------------------------------------------
0/1/0 A9K-MPA-4X10GE 1.101 spa fpga6 0 1.06 No
--------------------------------------------------------------------------------
0/1/1 A9K-MPA-20X1GE 1.101 spa fpga3 1 0.08 No
--------------------------------------------------------------------------------